If you are using the LOQED PowerKit with your LOQED Touch Smart Lock, you can conveniently charge your lock without removing the cover.
In order to charge your lock, please follow these steps:
Connect the charger to the lock (there is a connector on the motor module cover).
Open the App and change the battery type to Ni-MH, if you haven't done so already. This can be done under the menu "Settings -> Battery & Charging".
In the menu "Battery & Charging", press "Start charging".
The lock will now start charging, which can take up to 4 hours. The LED above the connector will remain on during the charging process, once the batteries are full, the charging will stop and the LED will turn off.